EMX (Expert Moldbase Extentions) 14.0.2.2 for Creo 8 (x64)

EMX (Expert Moldbase Extentions) 14.0.2.2 for Creo 8 (x64)
EMX (Expert Moldbase Extentions) 14.0.2.2 for Creo 8 | 380.0 mb
Product:B&W Expert Moldbase Extension (EMX)
Version:14.0.2.2 for PTC Creo 8
Supported Architectures:x64
Website Home Page :www.buw-soft.de
Languages Supported:multilanguage
System Requirements:Windows *
Software Prerequisites:pre-installed PTC Creo 8.0.x
Size:380.0 mb
Languages Supported: English, Deutsch

B&W Software, the leading global provider of add-on applications for the 3D-CAD System Creo Parametric, is pleased to announce the availability of Expert Moldbase Extension (EMX) 14.0.2.2 for PTC Creo 8.0. Use EMX to create a mold base as a regular assembly.
14.0.2.2 Changelog
Improvements
– Simplify assembly logic for Meusburger E1330 [RM-14475]
Bugfixes
– Issue fixed: EMX_SURFACE_FUNCTION parameter are not on both sides of holes in the plate templates [RM-13600]
– Issue fixed: auto_libtread, quilt_cut udfs etc. are not found in case udf folder exists in custom configuration, but udf is only available in installation [RM-14468]
– Issue fixed: Always paint mold base drawing area in case of editing nominal values, otherwise offset is not updated correctly [RM-14466]
– Issue fixed: Invalid orientation of rotation fixture for ejector sleeve templates [RM-14476]
– Issue fixed: In Modify Mode References get lost when changing type with different reference group type or are overwritten by Moldbase Default references [RM-10699]
EMX (Expert Moldbase Extentions) 14.0.2.2 for Creo 8 (x64)
PTC Creo EMX is an indispensable add-on toolfor moldmakers and toolmakers that eliminates timeconsuming, tedious tasks and the need for data translation that typically slows down the product development process.
PTC Creo EMX allows users to create moldbase layouts in a familiar 2D environment and automatically generate a 3D model to leverage the benefits of 3D design. The 2D process-driven GUI guides you toward your optimal design and updates automatically during the development of the moldbase. You can choose from a catalog of standard components (DME, HASCO, FUTABA, PROGRESSIVE, STARK, etc.) or customized components. The resulting 3D models are then used for interference checking during mold opening, as well as for automatic generation of deliverables such as production detail drawings and BOMs.
PTC Creo EMX increases design speed because the unique graphical interface gives you quick, real-time previewing before the 3D component or assembly is automatically placed. Once your components are placed, operations such as clearance cuts and drilled and tapped holes are automatically created in the appropriate neighboring plates and components, thus eliminating tedious and repetitive mold detailing tasks. PTC Creo EMX also enables moldmaking companies to capture their own unique design standards and best practices directly within the mold assemblies and components.
If you’re looking to accelerate moldbase design and find more time to development better quality, highly innovative designs, then PTC Creo Expert Moldbase Extension is your perfect solution.
B&W Webinar “What’s new in EMX?” in Creo Parametric
B&W Softwareis the leading global provider of add-on applications for the 3D-CAD System Creo Parametric. Since many years B&W develops specially tailored software solutions to increase efficiency in the field of product design.
Industry solutions – from design to manufacturing – raise the bar while using Creo Parametric. As a strategic PTC partner B&W software products are fully integrated into the Creo Parametric system and are marketed through PTC channels.
The extension and customizing of your CAD environment by B&W software for intelligently automating routine tasks lead to cost saving and increased productivity. Furthermore you will increase most quality aspects of your products, cut down development cycles and create room for new ideas and perspectives.
Our partner PTCis a leading provider of CAD, PLM and IoT Software solutions. Creo Parametric is the flagship solution for 3D CAD modeling and provides outstanding design capabilities for parts and assemblies. The widely established modules of this software portfolio (including some B&W applications) are installed at more than 28.000 enterprises worldwide and contribute to design and service advantages.

When running Creo Expert Moldbase Extension (EMX) 14.0.2.2 in the PTC Creo 8.0.x, the minimum requirements are superseded by the minimum requirements listed for PTC Creo 8.0.x.


Buy Premium From My Links To Get Resumable Support,Max Speed & Support Me

Links are Interchangeable – No Password – Single Extraction
admin000biet
Author: admin000biet

Add a Comment

Your email address will not be published.